<
>
2020 New model pp Extrusion Blow Molding Machine Juice Drink Bottle Fully Automatic Three cavities Blow Molding Machine
EH Series
Brand: lego
Model:SCJ-65-65EH+S2X1.10D
Applicable raw materials: PE,PP
Purpose: box, barrel, ball
Whether it contains thick control: yes
After-sales service: the whole machine is guaranteed for a year
Whether to provide processing customization: yes
Please call+86-757-29376175, +86-757-28376210,Consulting order.
Basic information
Advantages of the model
1. Reduce energy consumption up to 51%. Patent technology, full electric drive carriage and clamping unit, saving electricity power 250-300 degree.
2. Save labor cost. With three axes servo driven robots, it’s able to reduce 2 workers for each machine. Saving staff wage and management cost therefore.
3. Clamping force increased 10 times. With the theory of electrohydraulic cylinder, clamping force is 10 times of normal model in a closed cycle electrohydraulic system.
4. Carriage movement fast and precise. Carriage is driven by servo motor, instant accelerate, brake accurately, speed adjustable.
5. Blow pin is full electric driven. Response quickly and move smoothly.
6. Meet highly hygienic standard. Full electric driven machine is more suitable for the application of food, beverage, medicine etc. which has strict hygienic requirement.
7. Utility model patents and know how is applying to this machine.

Characteristics of machine performance
1. Equip with servo motor to drive die-head, blow pin and carriage movement.
2. High reliability and stabilization PLC (with touch screen) to control operation and temperature (with PID function).
3. Blow pin adjust by setting parameters from the touch screen, free from mechanical adjusting.
4. Replace mechanical structure of hydraulic cylinder and sensor with servo motor and ball screw rod, providing accurate action, quick movement and fast responding.
5. Incorporate with electric lift platform and deflash device.
6. Use famous pneumatic, hydraulic and electrical control element with long life usage.
7. Optionally configurate with automatic material loading machine and product conveyor to meet flow line production.
8. Extruder uses variable frequency control which adapt to the change of extruder rotation speed in blowing process.
9. With parison control function, it’s able to control bottle thickness precisely.

Model selection function
1. To facilitate the feeding, the user can choose to increase the hydraulic automatic filter screen device, which can be added to the lower blow, wall thickness controller, automatic incision drawing or automatic deplaning device;
2. Optional pre-sealing cutting knife, transverse cutting knife, imported hot knife, cold cutting knife, etc.
3. Optional diagonal insert, insert pen, insert pen, auxiliary cooler, etc.
4. Optional thickness controller;
5. Optional and equipped with the self-development of lego machinery for permanent magnet brushless dc motor for plastic hollow moulding machines: high reliability, good stability, and comprehensive energy saving 8% to 15%;
6. Optional macromolecular mixing screw: to ensure the performance of products, save 15% to 30% of the raw materials;
7. Optional Austria SIGMATEK control system, which performs 10 times faster than the traditional cycle refresh mode;
8. optional remote service system: automatic fault diagnosis, maintenance records, statistics report, video transmission, remote SMS notification and alarm, etc., used a powerful, clear;
9. Optional air delivery system, conveyor belt, automatic feeding system, 4 integration feeding machine and other supporting functions;
10. Optional die top needle function, mould internal labeling function, online leak detection function, opening and closing function;
11. Optional before and after mobile platform to facilitate mold installation;
12. Optional pre-clamping function, 2-axis servomotor, uniaxial servomotor;
13. The user can select the shunt spindle, screw or row type mould head, continuous extrusion die head and storage mould head.
14. Optional with a large pen blowing function to quickly increase production.
15. Optional robotic manipulator is used to combine the functions of secondary blowing and sizing and blowing and leak detection.
16. Optional boring machine (inside and outside the machine) can meet the requirements of different product sizes to make the product bottle mouth smoother.

Operation and precautions of aircraft
1. Preparation before production
1.1 check whether the machine has zero and component damage, check whether the screw is loose, check whether the wires and cables are damaged or lost. If there is any damage, replace or repair it in time; Check to see if there is debris in the extruder hopper and clean up, then close the material gate.
1.2 check whether the moving parts are firm and the screws are loose and loose, especially where the impact force is stronger, whether the belt transmission part is abnormal.
1.3 check the high pressure gas source, low pressure air source, power supply and water supply.
1.4 check the emergency stop switch, safety door switch and protection device to check whether the switch is normal.
1.5 check whether all pneumatic components leak gas, whether the action is sensitive.
1.6 please operate according to the operation manual.
2. Normal production
When the machine is normally produced, a person should be responsible for the care, and the issue will be timely handled. Due to the high degree of automation of the machine, the workload of normal production is very low, and the user can only need to collect the raw materials at regular intervals and use the container to collect the products and the flying side materials in the designated position of the machine.

Machine maintenance and maintenance
To enable the machine to achieve optimal performance and extend service life, the machine should be inspected and maintained regularly.
Please call:+86-757-29376175, +86-757-28376210,Consulting.

Product details




 
Machine parameters
Category  Hybrid EH series
Model SCJ-100EH2X3.15G
  Items Unit Specifications

Specification
Category / 1 Layer
Max. Blow Volume 
L 4x3
Material / PE\PP
QTY Of Die Head / 3
Die Head Distance (Center to Center)  mm 250
Net Weight kg) 17000
Machine Dimension mL×H×W 6.2*3.7*4.9

Die Head
Die Head Heating Zone / 7
Die Head Heating Power (kW) 20.5

Carriage system
QTY Of Station / 2
Min Mold Closing Distance (mm) 230
Max Mold Opening Distance (mm) 620
Mold Plate Size (mm,W×H) 750x470
Carriage  Stroke (mm) 900
Clamping Force kN) 247

Extruder Unit 
Extruder Diameter (mm) 100 55 25
Extruder Length/Diameter Ratio / 27 24 24
Extruder Rotating Speed (rpm) 10~66 10~48 10~21
Max Extrusion Capacity (kg/h) 230 25 4
Extruder Motor Rated Power (kW) 90 7.5 2.2
Barrel Heating Zone / 4 3 2
Barrel Heating Power (kW) 17 6.2 1.7
Cooling Fan Power kW 1.85 0.08 /

Power Unit
Carriage Motor Rated Power (kW) 5.5 / 5.5
Blow Pin Motor Rated Power (kW) 3 / 3
Head Lifing Motor Rated Power (kW) 2.2
Oil Pump Motor Rated Power (kW) 22
Hydraulic System Rated Working Pressure Mpa 16
Pneumatic System Rated Working Pressure Mpa 0.8
Cooling System Rated Working  Pressure Mpa 0.4
Universal product air consumption(compressed) m3/h 20
Hot Knife Power (kW) 2
Total Installed Power I (kW) 172.55

Remarks
Hydraulic oil NO. / tank volume L 46#/160
Chiller recommend (air-cooled/water-cooled) hp 15/10
Air compressor recommend (Add gas storage tank) hp 10

Remarks   

The above model can be equipped with 100-point parison control system. The parameters to be changed after superposition are as follows.

Servo parison control
SCJ-100EH+S2X3.15D
Parison Servo Motor Rated Power kW 4.5
Total Installed Power II kW 177.05
Schematic diagram of lock template
Note: 
1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power.
2. This parameter list is for reference only, and the actual model parameters may be adjusted.

About Leshan


Not"blow" can do Leshan bottle blowing machine

Stock name:Leshan Intelligent
Stock code:871695

LESHAN is the new three board listed company (an over-the-counter market for growth enterprises). Founded in August 1995, Leshan is located in Wusha Industrial Park,Daliang,Shunde District,Foshan City. It covers 37570m2 and there are over 330 staffs. Now Leshan has developed into a intelligent equipment enterprise which concentrates on plastics extrusion, design,R&D,production, marketing and service of blow molding machine.
COPYRIGHT © 2020 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED