<
>
Guangdong Supply Hollow Extruder Daily Commodity Food Packaging Blow Molding Machine ABS Automatic Blow Molding Machine
EH Series
Brand: Lego
Model: SCJ-85EH2X8.5D(80)
Property:  2 LAYER WITH VIEW STRIPE
Purpose: box, barrel, tank, hollow plate, tube, box, ball
Number of dies: 2
Number of dies: 8
After-sales service: the whole machine is guaranteed for a year
Please call+86-757-29376175, +86-757-28376210,Consulting order.
Previous:The First
Next:The last
Basic information
Advantages of the model
1. Reduce energy consumption up to 51%. Patent technology, full electric drive carriage and clamping unit, saving electricity power 250-300 degree.
2. Save labor cost. With three axes servo driven robots, it’s able to reduce 2 workers for each machine. Saving staff wage and management cost therefore.
3. Clamping force increased 10 times. With the theory of electrohydraulic cylinder, clamping force is 10 times of normal model in a closed cycle electrohydraulic system.
4. Carriage movement fast and precise. Carriage is driven by servo motor, instant accelerate, brake accurately, speed adjustable.
5. Blow pin is full electric driven. Response quickly and move smoothly.
6. Meet highly hygienic standard. Full electric driven machine is more suitable for the application of food, beverage, medicine etc. which has strict hygienic requirement.
7. Utility model patents and know how is applying to this machine.

Characteristics of machine performance
1. Equip with servo motor to drive die-head, blow pin and carriage movement.
2. High reliability and stabilization PLC (with touch screen) to control operation and temperature (with PID function).
3. Blow pin adjust by setting parameters from the touch screen, free from mechanical adjusting.
4. Replace mechanical structure of hydraulic cylinder and sensor with servo motor and ball screw rod, providing accurate action, quick movement and fast responding.
5. Incorporate with electric lift platform and deflash device.
6. Use famous pneumatic, hydraulic and electrical control element with long life usage.
7. Optionally configurate with automatic material loading machine and product conveyor to meet flow line production.
8. Extruder uses variable frequency control which adapt to the change of extruder rotation speed in blowing process.
9. With parison control function, it’s able to control bottle thickness precisely.

Model selection function
1. To facilitate the feeding, the user can choose to increase the hydraulic automatic filter screen device, which can be added to the lower blow, wall thickness controller, automatic incision drawing or automatic deplaning device;
2. Optional pre-sealing cutting knife, transverse cutting knife, imported hot knife, cold cutting knife, etc.
3. Optional diagonal insert, insert pen, insert pen, auxiliary cooler, etc.
4. Optional thickness controller;
5. Optional and equipped with the self-development of lego machinery for permanent magnet brushless dc motor for plastic hollow moulding machines: high reliability, good stability, and comprehensive energy saving 8% to 15%;
6. Optional macromolecular mixing screw: to ensure the performance of products, save 15% to 30% of the raw materials;
7. Optional Austria SIGMATEK control system, which performs 10 times faster than the traditional cycle refresh mode;
8. optional remote service system: automatic fault diagnosis, maintenance records, statistics report, video transmission, remote SMS notification and alarm, etc., used a powerful, clear;
9. Optional air delivery system, conveyor belt, automatic feeding system, 4 integration feeding machine and other supporting functions;
10. Optional die top needle function, mould internal labeling function, online leak detection function, opening and closing function;
11. Optional before and after mobile platform to facilitate mold installation;
12. Optional pre-clamping function, 2-axis servomotor, uniaxial servomotor;
13. The user can select the shunt spindle, screw or row type mould head, continuous extrusion die head and storage mould head.
14. Optional with a large pen blowing function to quickly increase production.
15. Optional robotic manipulator is used to combine the functions of secondary blowing and sizing and blowing and leak detection.
16. Optional boring machine (inside and outside the machine) can meet the requirements of different product sizes to make the product bottle mouth smoother.

Operation and precautions of aircraft
1. Preparation before production
1.1 check whether the machine has zero and component damage, check whether the screw is loose, check whether the wires and cables are damaged or lost. If there is any damage, replace or repair it in time; Check to see if there is debris in the extruder hopper and clean up, then close the material gate.
1.2 check whether the moving parts are firm and the screws are loose and loose, especially where the impact force is stronger, whether the belt transmission part is abnormal.
1.3 check the high pressure gas source, low pressure air source, power supply and water supply.
1.4 check the emergency stop switch, safety door switch and protection device to check whether the switch is normal.
1.5 check whether all pneumatic components leak gas, whether the action is sensitive.
1.6 please operate according to the operation manual.
2. Normal production
When the machine is normally produced, a person should be responsible for the care, and the issue will be timely handled. Due to the high degree of automation of the machine, the workload of normal production is very low, and the user can only need to collect the raw materials at regular intervals and use the container to collect the products and the flying side materials in the designated position of the machine.

Machine maintenance and maintenance
To enable the machine to achieve optimal performance and extend service life, the machine should be inspected and maintained regularly.
Please call:+86-757-29376175, +86-757-28376210,Consulting.

Product details




 
Machine parameters
Category K Series(4 Tie Bar)
 Model SCJ-85EH2X8.5D(80)
  Items  Units Specification

Specification
Category / 1 layers 
Max. Blow Volume  L 0.5
Material / PE,PP
QTY Of Die Head / 8
Die Head Distance (Center to Center)  mm 80
Net Weight kg 12000
Machine Dimension m L×H×W 4X2.6X4.6

Die Head
Die Head Heating Zone / 17
Die Head Heating Power kW 8.5

 Carriage system
QTY Of Station / 2
Min Mold Closing Distance mm 250
Max Mold Openning  Distance mm 450
Effective Dimension Of Mold Plate  (mm,W×H) W600×H370
Carriage  Stroke (mm) 750
Clamping Force kN 127

Extruder Unit 
Extruder Diameter mm 85 / /
Extruder Length/Diameter Ratio L/D 24 / /
Extruder Rotating Speed r/min 10-67 / /
Max Extrusion Capacity kg/h 130 / /
Extruder Motor Rated Power (kW) 30 / /
Barrel Heating Zone / 3 / /
Barrel Heating Power kW 10.5 / /
Cooling Fan Power kW 0.54 / /

Power Unit
Oil Pump Motor Rated Power kW 4.5
Hydraulic System Rated Working Pressure Mpa 3
Pneumatic System Rated Working Pressure Mpa 2.2
Cooling System Rated Working  Pressure Mpa 15
Universal product air consumption(compressed) m³/h 23
Hot Cutter Power kW 2
Total Installed Power kW 83.74

Remarks
Hydraulic oil NO. / tank volume L 46#/160L
Chiller recommend (air-cooled/water-cooled) hp 10 8  
Air compressor recommend (Add gas storage tank) hp 10    
/Remarks:      /All the machines above can be optionally equipped with 100 points parison control system,parameters would be changed as below:
 After with 100 points parison control  Model / SCJ-85EH2X8.5D(80)
Parison Servo Motor Rated Power kW 4.5
Total Installed Power kW 88.24
 Clamping plate
Note: 
1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power.
2. This parameter list is for reference only, and the actual model parameters may be adjusted.

About Leshan


Not"blow" can do Leshan bottle blowing machine

Stock name:Leshan Intelligent
Stock code:871695

LESHAN is the new three board listed company (an over-the-counter market for growth enterprises). Founded in August 1995, Leshan is located in Wusha Industrial Park,Daliang,Shunde District,Foshan City. It covers 37570m2 and there are over 330 staffs. Now Leshan has developed into a intelligent equipment enterprise which concentrates on plastics extrusion, design,R&D,production, marketing and service of blow molding machine.
COPYRIGHT © 2020 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED