<
>
Guangdong supplies 7L bottle blowing machine plastic bottle making machine automatic bottle blowing machine
K Series
Brand : Lego
Model: SCJ 75K2×1.10D
Applicable raw materials: PE,PP
Purpose: box, barrel, tank, hollow plate, tube, box, ball
Whether it contains thick control: yes
After-sales service: the whole machine is guaranteed for a year
Whether to provide processing customization: yes
Please call+86-757-29376175, +86-757-28376210,Consulting order.
Basic information
Advantages of the model
1. Economical equipment, cost is not high, suitable for investment not much and initial industry customers.
2. Dual protection of unique locking frame: first, the guide rail has the valve value electronic components, and the second is that the mechanical limit block is provided at the end of the guide rail to prevent the lock arm from falling off.
3. Inside of the fine machining die, the flow path is free of dead Angle, and professional analysis software is used to measure the smoothness of the runner's runner, ensuring the smooth and fine flow of the two walls.
4. Optimize hydraulic oil circuit design, save electricity, quick action, convenient parameter adjustment.
5. Variable frequency speed adjustable extrusion motor can adapt to the change of screw rotation speed of blow molding process.
6. According to the product characteristics, different mould heads are set up for customer selection.
7. The K series USES the central oil cylinder structure of the back plate, and the locking force is strong and even.

Characteristics of machine performance
1. It is suitable for plastic hollow products of PE, PP, EVA, ABS, K, TPU, nylon, etc.
2. The four-guide column balance pull rod structure, the lower bearing super hard adjustable guide column and the all-open template design, can hold the super long super wide mold.
3. Please choose the products next to you or go down to the following products to facilitate the production of different products.
4. Touch-screen interface, simple operation.
5. Design of duplex pumps: two hydraulic pumps in parallel oil supply, one hydraulic oil pump in high pressure, another hydraulic pump unloading characteristics. Low power consumption and low power consumption.
6. Double proportional valve control oil flow velocity and pressure, control flow of reversing valve, brake valve brake, smooth and fast movement;
7. The central force design of the template, the locking force uniformly distributed;
8. CE standard safety design, focus on user safety;
9. The Japanese inverter adjusts the rotor speed and saves energy and energy.
10. Automatic lubrication system, reduce equipment maintenance work.

Model selection function
1. To facilitate the feeding, the user can choose to increase the hydraulic automatic filter screen device, which can be added to the lower blow, wall thickness controller, automatic incision drawing or automatic deplaning device;
2. Optional pre-sealing cutting knife, transverse cutting knife, imported hot knife, cold cutting knife, etc.
3. Optional diagonal insert, insert pen, insert pen, auxiliary cooler, etc.
4. Optional thickness controller;
5. Optional and equipped with the self-development of lego machinery for permanent magnet brushless dc motor for plastic hollow moulding machines: high reliability, good stability, and comprehensive energy saving 8% to 15%;
6. Optional macromolecular mixing screw: to ensure the performance of products, save 15% to 30% of the raw materials;
7. Optional Austria SIGMATEK control system, which performs 10 times faster than the traditional cycle refresh mode;
8. optional remote service system: automatic fault diagnosis, maintenance records, statistics report, video transmission, remote SMS notification and alarm, etc., used a powerful, clear;
9. Optional air delivery system, conveyor belt, automatic feeding system, 4 integration feeding machine and other supporting functions;
10. Optional die top needle function, mould internal labeling function, online leak detection function, opening and closing function;
11. Optional before and after mobile platform to facilitate mold installation;
12. Optional pre-clamping function, 2-axis servomotor, uniaxial servomotor;
13. The user can select the shunt spindle, screw or row type mould head, continuous extrusion die head and storage mould head.
14. Optional with a large pen blowing function to quickly increase production.
15. Optional robotic manipulator is used to combine the functions of secondary blowing and sizing and blowing and leak detection.
16. Optional boring machine (inside and outside the machine) can meet the requirements of different product sizes to make the product bottle mouth smoother.

Operation and precautions of aircraft
1. Preparation before production
1.1 check whether the machine has zero and component damage, check whether the screw is loose, check whether the wires and cables are damaged or lost. If there is any damage, replace or repair it in time; Check to see if there is debris in the extruder hopper and clean up, then close the material gate.
1.2 check whether the moving parts are firm and the screws are loose and loose, especially where the impact force is stronger, whether the belt transmission part is abnormal.
1.3 check the high pressure gas source, low pressure air source, power supply and water supply.
1.4 check the emergency stop switch, safety door switch and protection device to check whether the switch is normal.
1.5 check whether all pneumatic components leak gas, whether the action is sensitive.
1.6 please operate according to the operation manual.
2. Normal production
When the machine is normally produced, a person should be responsible for the care, and the issue will be timely handled. Due to the high degree of automation of the machine, the workload of normal production is very low, and the user can only need to collect the raw materials at regular intervals and use the container to collect the products and the flying side materials in the designated position of the machine.

Machine maintenance and maintenance
To enable the machine to achieve optimal performance and extend service life, the machine should be inspected and maintained regularly.
Please call:+86-757-29376175, +86-757-28376210,Consulting.

Product details


Machine parameters
Category /K Series(4 Tie Bar)
 Model  SCJ 75K2×1.10D
  Items  Units Specification

Specification
Category /  1layer 
Max. Blow Volume  L 7
Material / PE,PP
QTY Of Die Head / 1
Die Head Distance (Center to Center)  mm /
Net Weight kg 6300
Machine Dimension mm L×H×W 3930X2500X2200

Die Head
Die Head Heating Zone / 2
Die Head Heating Power kW 9.5

 Carriage system
QTY Of Station / 2
Min Mold Closing Distance mm 230
Max Mold Openning  Distance mm 580
Effective Dimension Of Mold Plate  (mm,W×H) W380×H460
Carriage  Stroke (mm) 500
Clamping Force kN 100

Extruder Unit 
Extruder Diameter mm 75
Extruder Length/Diameter Ratio L/D 24
Extruder Rotating Speed r/min 20-63/(20-78)
Max Extrusion Capacity kg/h 95/(105)
Extruder Motor Rated Power (kW) 22/(30)
Barrel Heating Zone / 3
Barrel Heating Power kW 10
Cooling Fan Power kW 0.3

Power Unit
Oil Pump Motor Rated Power kW 11
Hydraulic System Rated Working Pressure Mpa 14
Pneumatic System Rated Working Pressure Mpa 0.8
Cooling System Rated Working  Pressure Mpa 0.4
Universal product air consumption(compressed) m³/h 15
Hot Cutter Power kW 2
Total Installed Power kW 54.8/(62.8)

Remarks
Hydraulic oil NO. / tank volume L 46#/200L
Chiller recommend (air-cooled/water-cooled) hp 8
Air compressor recommend (Add gas storage tank) hp 10
Remarks:      All the machines above can be optionally equipped with 100 points parison control systemmparameters would be changed as below:

After with 100 points parison control
 Model / SCJ 75K+S2×1.10D
Parison Servo Motor Rated Power kW 5.5
Total Installed Power kW 60.3/(68.3)
Clamping plate
Note: 
1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power.
2. This parameter list is for reference only, and the actual model parameters may be adjusted.
About Leshan

Not"blow" can do Leshan bottle blowing machine

Stock name:Leshan Intelligent
Stock code:871695

LESHAN is the new three board listed company (an over-the-counter market for growth enterprises). Founded in August 1995, Leshan is located in Wusha Industrial Park,Daliang,Shunde District,Foshan City. It covers 37570m2 and there are over 330 staffs. Now Leshan has developed into a intelligent equipment enterprise which concentrates on plastics extrusion, design,R&D,production, marketing and service of blow molding machine.
COPYRIGHT © 2020 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED