<
>
Fully Automatic Forming Reciprocating Blow Molding Machine Chemical Barrel Blow Molding Machine Hollow Extruder Blowing Bottle
Y Series
Brand: Lego
Model : SCJ90Y+H+S1×1.30D
Plastic proceed: PE,PP,PS,PC,PVC
Purpose: box, barrel, tank, hollow plate, tube, box, ball
Thickness control system: Yes
Warranty: One Year Guarantee
Machine customization: Yes
Please call+86-757-29376175, +86-757-28376210,Consulting order.
Basic information
Advantages of the model
1.The whole machine frame uses steel welding, durable and not deformed, stable and solid design.
2. The machine adopts a sliding translation system to facilitate the installation of moulds and the alignment of the die head and the mould.
3. Through transmission principle of the gear motor and elevator acceleration machine, the lifting of the die head and extrusion system can meet the requirements of different mould heights and different blow molding processes.
4. The storage die head adopts double envelop which leads to fast glue, not anti-glue and more uniform materials.

Characteristics of machine performance
1. The maximum blow volume is 30L, PE, PP, EVA, ABS, K, TPU, nylon can be used.
2. Using the German Siemens TP700 color touch screen 7-inch color screen, 800 x 480 resolution, 16 mega pixels.
3. With platform lifting function which can adapt to different mold height and blow molding process requirements.
4. The hydraulic system adopts proportional technology to optimize the design of hydraulic circuit and has the characteristics of electricity saving, quick movement and easy to adjust the parameters.
5. Oil path flow velocity and pressure controlled by double-proportion valve; flow direction controlled by reversing valve; deceleration valve brake functions smoothly and quickly. The automatic lubrication system to reduce equipment maintenance workload.
6. It adopts famous factory’s,pneumatic, hydraulic and electrical control components which has long service life.
7. Diehead plastic pressurizing piston and material accumulation chamber use extremely hard wear-resistant material and hence long service life and durable.
8. The machine is equipped with down widen device, which can stretch the material tube to both sides, and then blow up to make the bottle shape more symmetrical and full.
9.For large diameter pipe, the machine is equipped with pre-clamped embryo device adhesive nozzle to pen blowing.
10. Pre-sealed cutter device can ensure that the length of the extruded tube is consistent so as to avoid the waste of raw materials and can not be blow molding caused by the too long tube.
11. Strengthen and hard cold processing screw, equipped with plastic die head, double plasticizing, good plasticizing effect, large amount of extrusion screw, barrel wear resistance.
12. The force design of the mould plate center ensures the balance of clamping force.
13. The whole mold template system are used ductile iron, which is stable and solid, durable and not deformed.

Model selection function
1. To facilitate the feeding, the user can choose to increase the hydraulic automatic filter screen device, which can be added to the lower blow, wall thickness controller, automatic incision drawing or automatic deplaning device;
2. Optional pre-sealing cutting knife, transverse cutting knife, imported hot knife, cold cutting knife, etc.
3. Optional diagonal insert, insert pen, insert pen, auxiliary cooler, etc.
4. Optional thickness controller;
5. Optional and equipped with the self-development of lego machinery for permanent magnet brushless dc motor for plastic hollow moulding machines: high reliability, good stability, and comprehensive energy saving 8% to 15%;
6. Optional macromolecular mixing screw: to ensure the performance of products, save 15% to 30% of the raw materials;
7. Optional Austria SIGMATEK control system, which performs 10 times faster than the traditional cycle refresh mode;
8. optional remote service system: automatic fault diagnosis, maintenance records, statistics report, video transmission, remote SMS notification and alarm, etc., used a powerful, clear;
9. Optional air delivery system, conveyor belt, automatic feeding system, 4 integration feeding machine and other supporting functions;
10. Optional die top needle function, mould internal labeling function, online leak detection function, opening and closing function;
11. Optional before and after mobile platform to facilitate mold installation;
12. Optional pre-clamping function, 2-axis servomotor, uniaxial servomotor;
13. The user can select the shunt spindle, screw or row type mould head, continuous extrusion die head and storage mould head.
14. Optional with a large pen blowing function to quickly increase production.
15. Optional robotic manipulator is used to combine the functions of secondary blowing and sizing and blowing and leak detection.
16. Optional boring machine (inside and outside the machine) can meet the requirements of different product sizes to make the product bottle mouth smoother.

Operation and precautions of aircraft
1. Preparation before production
1.1 check whether the machine has zero and component damage, check whether the screw is loose, check whether the wires and cables are damaged or lost. If there is any damage, replace or repair it in time; Check to see if there is debris in the extruder hopper and clean up, then close the material gate.
1.2 check whether the moving parts are firm and the screws are loose and loose, especially where the impact force is stronger, whether the belt transmission part is abnormal.
1.3 check the high pressure gas source, low pressure air source, power supply and water supply.
1.4 check the emergency stop switch, safety door switch and protection device to check whether the switch is normal.
1.5 check whether all pneumatic components leak gas, whether the action is sensitive.
1.6 please operate according to the operation manual.
2. Normal production
When the machine is normally produced, a person should be responsible for the care, and the issue will be timely handled. Due to the high degree of automation of the machine, the workload of normal production is very low, and the user can only need to collect the raw materials at regular intervals and use the container to collect the products and the flying side materials in the designated position of the machine.

Machine maintenance and maintenance
To enable the machine to achieve optimal performance and extend service life, the machine should be inspected and maintained regularly.
Please call:+86-757-29376175, +86-757-28376210,Consulting.

Product details


Machine parameters
Category Y Series(3 Tie Bar for Petg bottles)
 Model  SCJ90Y+H+S1×1.30D
  Items  Units Specification

Specification
Category / Linear Guide Way
Max. Blow Volume 
L 30
Material / PE,PP,PS,PC,PVC
QTY Of Die Head / 4.5
Die Head Distance (Center to Center)  mm /
Net Weight kg 9250
Machine Dimension mm L×H×W 4900×3500×2830

Die Head
Die Head Heating Zone / 3
Die Head Heating Power kW 20

 Carriage system
QTY Of Station / 1
Min Mold Closing Distance mm 450
Max Mold Openning  Distance mm 900
Effective Dimension Of Mold Plate  (mm,W×H) W820×H710
Carriage  Stroke (mm) /
Clamping Force kN 280

Extruder Unit 
Extruder Diameter mm 90
Extruder Length/Diameter Ratio L/D 23
Extruder Rotating Speed r/min 20-65
Max Extrusion Capacity kg/h 160
Extruder Motor Rated Power (kW) 45
Barrel Heating Zone / 4
Barrel Heating Power kW 17
Cooling Fan Power kW 0.72

Power Unit
Oil Pump Motor Rated Power kW 22
Hydraulic System Rated Working Pressure Mpa 16
Pneumatic System Rated Working Pressure Mpa 0.8
Cooling System Rated Working  Pressure Mpa 0.4
Universal product air consumption(compressed) m³/h 20
Hot Cutter Power kW 1
Total Installed Power kW 104.72

Remarks
Hydraulic oil NO. / tank volume L 46#/300
Chiller recommend (air-cooled/water-cooled) hp 15/10
Air compressor recommend (Add gas storage tank) hp 10
Note: 
1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power.
2. This parameter list is for reference only, and the actual model parameters may be adjusted.

About Leshan


Not"blow" can do Leshan bottle blowing machine

Stock name:Leshan Intelligent
Stock code:871695

LESHAN is the new three board listed company (an over-the-counter market for growth enterprises). Founded in August 1995, Leshan is located in Wusha Industrial Park,Daliang,Shunde District,Foshan City. It covers 37570m2 and there are over 330 staffs. Now Leshan has developed into a intelligent equipment enterprise which concentrates on plastics extrusion, design,R&D,production, marketing and service of blow molding machine.

COPYRIGHT © 2020 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED